Resin SZUV-T1120-high temperature resistance
一般的な紹介
特徴:
SZUV -T1120は比類のない熱性能を有する黄色SL樹脂です。 それは長い時間で200短時間における℃及び120℃を超える温度に耐えることができます。 これは、高温と不利なテストアプリケーションのさまざまな処理するために設計されています。
典型的な特徴
高強度と良好な耐性
SZUV-T1120 can stand up humidity, water and solvents, such as gasoline, transmission fluid, oil and coolant. With its unmatched heat resistance, it is suitable for flow, HVAC, lighting, tooling, molding and wind tunnel testing applications.
-build速くDEVELOP
By providing fast output and parts with a smooth, easy-to-handling surface, SZUV-T1120 can finishing your project from drawing to testing parts in the shortest time.
Application Cases
-under-フード部品試験
-high温度RTV成形
-Windトンネル試験
-Lighting器具試験
-Compositeオートクレーブツーリング
-HVACコンポーネントのテスト
マニホールドテスト-Intake
-Orthodontics
APPLICATION FIELDS
教育
ハンド金型
車の部品
パッケージデザイン
アートデザイン
医療の
PHYSICAL PROPERTIES (LIQUID)
外観 | white |
密度 |
1.13グラム/ cmで3 @ 25 ℃ |
粘度 |
400~480 cps @ 29 ℃ |
Dpは |
0.152mm |
EC |
7.6 mJ/cm2 |
建物の層の厚さ |
0.05〜0.12ミリメートル |
MECHANICAL PROPERTIES (POST-CURED)
Measurement |
Test Method |
Value | |
90分のUV硬化後 |
90-minute UV +2 hours@160℃ thermal post-cure |
||
硬さ、ショアD | ASTMのD 2240 | 87 | 91 |
曲げ弾性率、メガパスカル | ASTMのD 790 | 2678-3186 | 3502-3631 |
曲げ強度、メガパスカル | ASTMのD 790 | 60〜80 | 90から101 |
引張弾性率、MPaで | ASTMのD 638 | 2840-3113 | 3484-3771 |
引張強さ、MPaで | ASTMのD 638 | 58から67 | 50から62 |
破断伸び | ASTMのD 638 | 4から8パーセント | 4-6% |
衝撃強度は、lzod、J / mのノッチ | ASTMのD 256 | 18-30 | 16-23 |
Heat deflection temperature, ℃ | ASTM D 648 @ 66PSI | 81 | 98 |
Glass transition, Tg, ℃ | DMA,E’peak | 100 | 111 |
Coefficient of thermal expansion, E6/℃ | TMA(T<Tg) | 79 | 86 |
Thermal conductivity, W/m.℃ | 0.171 | ||
密度 | 1.24 | ||
吸水 | ASTM D 570から98 | 0.49パーセント | 0.46パーセント |
後硬化材料の機械的特性
測定 |
試験方法
|
|
値 |
|
|
90分のUV硬化後 |
2時間160 @ 90分のUV ℃ の熱 硬化後 |
硬さ、ショアD |
ASTMのD 2240 |
87 |
91 |
曲げ弾性率、メガパスカル |
ASTMのD 790 |
2678-3186 |
3502-3631 |
曲げ強度、メガパスカル |
ASTMのD 790 |
60〜80 |
90から101 |
引張弾性率、MPaで |
ASTMのD 638 |
2840-3113 |
3484-3771 |
引張強さ、MPaで |
ASTMのD 638 |
58から67 |
50から62 |
破断伸び |
ASTMのD 638 |
4から8パーセント |
4 -6% |
衝撃強度は、lzod、J / mのノッチ
|
ASTMのD 256
|
18〜30
|
16〜23 |
熱変形温度、 ℃
|
ASTM D 648 @ 66PSI
|
81 |
98
|
ガラス転移、Tgは 、 ℃ |
DMA 、E 」ピーク
|
100 |
111
|
熱膨張係数、E6 / ℃ |
TMA (T <Tgは)
|
79
|
86
|
熱伝導率、W / mです。 ℃ |
|
0.171 |
|
密度 |
|
1.24 |
|
吸水 |
ASTM D 570から98 |
0.49パーセント |
0.46パーセント |