Rapid Delivery for Best 3d Printer Scanner 2019 - Print material-high tenacity resin-9006 – Digital Manufacturing

Short Description:

Product Detail

Product Tags

Feedback (2)

In an effort to finest meet up with client's requirements, all of our operations are strictly performed in line with our motto "High High quality, Competitive Rate, Fast Service" for Sls 3d Printer Price, Sla 3d Printer Online India, Industrial 3d Scanner Price, "Change for that improved!" is our slogan, which means "A better globe is before us, so let's take pleasure in it!" Change for the better! Are you all set?

Rapid Delivery for Best 3d Printer Scanner 2019 - Print material-high tenacity resin-9006 – Digital Manufacturing Detail:

3D Printing Materials

Resin-9006

Introduction of 3D Printing Materials

Characteristics

SZUV-S9006

PRODUCT DESCRIPTION

SZUV-S9006 is an ABS like SL resin which has high-toughness features. It is designed for solid state SLA platforms. SZUV-S9006 can be applied in master patterns, concept models, assembly parts and functional prototypes in the field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-S9006 is over 6.5months.SZUV-S9006

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines

-Improved strength retained, improved dimensions retention of parts in humid condition

-need minimal part finishing

-Long shelf life in machine

-Low bottom contraction

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing

-Buliding accurate and high tough parts with an improved dimensional stability

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing

-Magnificent white color

-Outstanding machinable SLA material

High-toughness

Physical Properties – Liquid Material

Appearance	White
Density	1.11-~1.15g/cm³ @ 25 ℃
Viscosity	230~290cps @ 26 ℃
Dp	0.13~0.145 mm
Ec	9.5~10.5 mJ/cm²
Building layer thickness	0.05~0.12mm

Mechanical Properties of Post-Cured Material

MEASUREMENT	TEST METHOD	VALUE
		90-minute UV post-cure
Hardness, Shore D	ASTM D 2240	75~85
Flexural modulus, Mpa	ASTM D 790	2,592-2,675
Flexural strength, Mpa	ASTM D 790	63- 70
Tensile modulus, MPa	ASTM D 638	2,489-2,595
Tensile strength, MPa	ASTM D 638	36-53
Elongation at break	ASTM D 638	15 -25%
Poisson`s Ratio	ASTM D 638	0.4-0.44
Impact strength notched Izod, J/m	ASTM D 256	45 - 70
Heat deflection temperature, ℃	ASTM D 648 @66PSI	38~50
Glass transition,Tg	DMA，E”peak	40~54
Coefficient of thermal expension	TMA(T<Tg)	90~102*E-6
Density, g/cm³		1.12~1.18
Dielectric Constant60 Hz	ASTM D 150-98	4.2~5.0
Dielectric Constant 1 kHz	ASTM D 150-98	3.3~4.2
Dielectric Constant1 MHz	ASTM D 150-98	3.2~4.0
Dielectric StrengthkV/mm	ASTM D 1549-97a	12.8~16.1

Note: the temperature of szuv-s9006 should not be too high. Please use it below 25c.The relative humidity for use and storage must be under 38RH%.

Fire Fighting Measures

（1）extinguishant

Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

（2）Special risk

Fires may produce irritation and harmful gas

（3）The firemen of protective measures

Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6.Accidental Release Measures

（1）Homework personnel protective equipment

Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

（2）Environmental protection measures

Prevent products from entering the drain or open water

（3）Cleaning method

For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

（4）Secondary hazard prevention measures

Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7.Handling And Storage

（1）Operation treatment technical measures

Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

（2）Partial or full ventilation

Maintain adequate ventilation

（3）Safe handling matters needing attention

No smoke, no fire

（4）Safe storage conditions

Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

（5）packaging container and material

In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽车配件
包装设计
艺术设计
医疗领域

Education

Hand Molds

Auto Parts

Packaging Design

Art Design

Medical

Product detail pictures:

Related Product Guide:
History of 3D Printing | Handheld 3d Scanner Review
Samsung Galaxy S10 Plus review: the anti-iPhone | 3d Printers Suppliers In Cape Town

With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Rapid Delivery for Best 3d Printer Scanner 2019 - Print material-high tenacity resin-9006 – Digital Manufacturing , The product will supply to all over the world, such as: Russia, Ukraine, Mexico, With the principle of win-win, we hope to help you make more profits in the market. An opportunity is not to be caught, but to be created. Any trading companies or distributors from any countries are welcomed.

3d Laser Scanning Companies Maryland