products

Hot-selling 3d Printer Build Volume Comparison - Print material-exquisite white-8006 – Digital Manufacturing

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have been experienced manufacturer. Wining the majority of the crucial certifications of its market for Best 3d Printer In The World, Dws 3d Printer Price, 3d Printers China, As a key enterprise of this industry, our company makes efforts to become a leading supplier, based on the faith of professional quality & worldwide service.
Hot-selling 3d Printer Build Volume Comparison - Print material-exquisite white-8006 – Digital Manufacturing Detail:

3D Printing Materials

Exquisite white-8006

Introduction of 3D Printing Materials

Characteristics

SZUV-W8006  

PRODUCT DESCRIPTION 

SZUV-W8006 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. SZUV-W8006 can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-W8006 is over 6.5months.SZUV-W8006

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines

-Improved strength retained, improved dimensions retention of parts in humid condition

-need minimal part finishing

-Long shelf life in machine

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing

-Buliding accurate and high tough parts with an improved dimensional stability

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing

-Magnificent white color

-Outstanding machinable SLA material

Physical Properties – Liquid Material 

Appearance White
Density 1.13g/cm3 @ 25 ℃
Viscosity 376 cps @ 27 ℃
Dp 0.148 mm
Ec 7.8 mJ/cm2
Building layer thickness 0.1mm

 Mechanical Properties of Post-Cured Material 

MEASUREMENT TEST METHOD VALUE
90-minute UV post-cure
Hardness, Shore D ASTM D 2240 87
Flexural modulus, Mpa ASTM D 790 2,592-2,675
Flexural strength, Mpa ASTM D 790 70- 75
Tensile modulus, MPa ASTM D 638 2,599-2,735
Tensile strength, MPa ASTM D 638 39-56
Elongation at break ASTM D 638 13 -20%
Poisson`s Ratio ASTM D 638 0.4-0.43
Impact strength notched Izod, J/m ASTM D 256 35 - 45
Heat deflection temperature, ℃ ASTM D 648 @66PSI 62
Glass transition,Tg,℃ DMA,E”peak 73
Coefficient of thermal expension, /℃ TMA(T<Tg) 95*E-6
Density, g/cm3 1.16
Dielectric Constant 60 Hz ASTM D 150-98 4.6
Dielectric Constant 1 kHz ASTM D 150-98 3.9
Dielectric Constant 1 MHz ASTM D 150-98 3.6
Dielectric StrengthkV/mm ASTM D 1549-97a 14.9

 Note: the temperature of szuv-w8006 should not be too high. Please use it below 25c.Recommended temperature for use and preservation is 18-25 ℃

Fire Fighting Measures

(1) extinguishant

 Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

(2) Special risk

 Fires may produce irritation and harmful gas

(3) The firemen of protective measures

 Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6. Accidental Release Measures

(1) Homework personnel protective equipment

 Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

(2) Environmental protection measures

 Prevent products from entering the drain or open water

(3) Cleaning method

 For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

 For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

(4) Secondary hazard prevention measures

 Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7. Handling And Storage

(1) Operation treatment technical measures

 Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

(2) Partial or full ventilation   Maintain adequate ventilation

(3) Safe handling matters needing attention   No smoke, no fire

(4) Safe storage conditions

 Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

(5) packaging container and material

 In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽车配件
包装设计
艺术设计
医疗领域

Education

Rapid prototype

Auto Parts

Constructional design

Art Design

Medical


Product detail pictures:

Hot-selling 3d Printer Build Volume Comparison - Print material-exquisite white-8006  – Digital Manufacturing detail pictures


Related Product Guide:
A new TB vaccine is within reach | 3d Printing Rapid Prototype
Review: the Apium P220 a capable, high performing industrial polymer 3D printer | Handheld 3d Scanner Review

We take pleasure in a really excellent name amongst our shoppers for our exceptional product or service excellent, competitive rate and also the greatest services for Hot-selling 3d Printer Build Volume Comparison - Print material-exquisite white-8006 – Digital Manufacturing , The product will supply to all over the world, such as: Uganda, Amman, South Africa, The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.
  • This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
    5 Stars By Bess from Casablanca - 2015.12.25 12:43
    The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Anna from Mexico - 2015.06.21 17:11
    Write your message here and send it to us