Resin-SZUV-W8006-exquisite white
Introduction o 3D Pai Pono Ha awina
ano
SZUV-W8006
Product hōʻikeʻano
SZUV-W8006 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. SZUV-W8006 can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries. The parts durability building with SZUV-W8006 is over 6.5 months.
TYPICAL hiʻona
-Liquid resin is medium viscosity, so easy for recoating, easy to clean parts and machines
-Improved ikaika, hoopaa mai la, iaono? Ienoai Anaʻana o nā māhele ma humid ano
-Need minimal part finishing
-Long holopapa ola ma ka mīkini
TYPICAL pomaikai
-Need less part finishing time, easier post-curing
-Building accurate and high tough parts with an improved dimensional stability
-High mea e like ai ka pāʻana o ka holo ninini wahi
-Low emi aku ana lakou a me ka maikai ia'ku i ka yellowing
-Magnificent keʻokeʻo ka waihoʻoluʻu
-Outstanding machinable SLA material
Helu waiwai - wai Material
helehelena | keʻokeʻo |
pa apŘ | 1.13g / knm 3 @ 25 ℃ |
(viscosity) | 376 cps @ 27 ℃ |
DP | 0,148 mm o |
ec | 7,8 mJ / knm 2 |
Building, ahu iho mānoanoa | 0.1mm |
Note: the temperature of szuv-w8006 should not be too high. Please use it below 25℃. Recommended temperature for use and preservation is 18-25 ℃.
Pēpēʻana aku la o pūnaewele
(1) hana lapaau ka hoʻohana 'ana
Pale hui 'ana me nā maka, a me kaʻili aahu. ole ana noe a me ka mahu,ʻaʻole accidentally ke ale wale iho Mai e, e malama ipu paa i paʻa ma hope o ka hoʻokolokolo pono, i ka hoʻomaʻemaʻe.
(2) Partial or full ventilation, maintain adequate ventilation
(3) palekana pēpēʻana mea i kiaʻi noonoo No uwahi, i ke ahi
(4) palekana pūnaewele ana
Stored in a cool, well-ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.
(5)'ōpala ipu a me ka mea
Ma ke kaʻina hana o ka malama, e 'oluʻolu mai i hoolilo i nā ipu. Mai emi aku i hope i ka palapala ipu o nā huahana mea e e hoʻohana.
Application Cases
Education
Hoʻokomo wikiwiki
Auto wahi
Constructional manao
Hoʻolālā Mea Hou
Lapaʻau o
Physical Properties (Liquid)
helehelena | keʻokeʻo |
pa apŘ | 1.13g / knm 3 @ 25 ℃ |
(viscosity) | 376 cps @ 27 ℃ |
DP | 0,148 mm o |
ec | 7,8 mJ / knm 2 |
Building, ahu iho mānoanoa | 0.1mm |
Mechanical Properties (Post-Cured)
huahelu | TEST METHOD |
waiwai |
90-minuke UV moʻomanaʻo-hoolaia | ||
Paakiki, Shore D | ASTM D 2240 | 87 |
Flexural modulus, Mpa | ASTM D 790 | 2,592-2,675 |
Flexural ikaika, Mpa | ASTM D 790 | 70- 75 |
Tensile modulus, MPa | ASTM D 638 | 2,599-2,735 |
Tensile ikaika, MPa | ASTM D 638 | 39-56 |
Elongation ma kaʻoluʻolu o | ASTM D 638 | 13 -20% |
Poisson’s Ratio | ASTM D 638 | 0.4-0.43 |
Hopena ikaika notched Izod, J / ka m | ASTM D 256 | 35 - 45 |
Heat deflection wela, ℃ | ASTM D 648 @ 66PSI | 62 |
Glass transition, Tg,℃ | DMA, E "piko | 73 |
Coefficient of thermal expansion, /℃ | TMA (T <Tg) | 95 * E-6 |
Nuʻa, g. / Knm 3 | 1.16 | |
Dielectric Constant 60 Hz | ASTM D 150-98 | 4,6 |
Dielectric Constant 1 kHz | ASTM D 150-98 | 3,9 |
Dielectric Constant 1 MHz | ASTM D 150-98 | 3,6 |
Dielectric Strength kV/mm | ASTM D 1549-97a | 14,9 |
Note: the temperature of szuv-w8006 should not be too high. Please use it below 25℃. Recommended temperature for use and preservation is 18-25 ℃.