Resin-SZUV-W8006-exquisite white
3D ਛਪਾਈ ਸਮੱਗਰੀ ਦੀ ਜਾਣ-ਪਛਾਣ
ਅੰਗ
SZUV-W8006
ਉਤਪਾਦ ਵੇਰਵਾ
SZUV-W8006 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. SZUV-W8006 can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries. The parts durability building with SZUV-W8006 is over 6.5 months.
ਆਮ ਫੀਚਰ
-Liquid resin is medium viscosity, so easy for recoating, easy to clean parts and machines
-Improved ਤਾਕਤ ਖਤਮ, ਨਮੀ ਹਾਲਤ ਵਿੱਚ ਹਿੱਸੇ ਦੀ ਸੁਧਾਰ ਮਾਪ ਧਾਰਨ
-Need minimal part finishing
ਮਸ਼ੀਨ ਵਿੱਚ ਲੰਮੇ ਸ਼ੈਲਫ ਦੀ ਜ਼ਿੰਦਗੀ
ਆਮ ਲਾਭ
-Need less part finishing time, easier post-curing
-Building accurate and high tough parts with an improved dimensional stability
ਵੈਕਿਊਮ ਕਾਸਟਿੰਗ ਹਿੱਸੇ ਲਈ -High ਗੁਣਵੱਤਾ ਕੰਟਰੋਲ
ਸੁੰਗੜ ਜਾਵੇਗੀ ਅਤੇ ਪੀਲਾ ਕਰਨ ਲਈ ਚੰਗਾ ਟਾਕਰੇ -Low
-Magnificent ਚਿੱਟੇ ਰੰਗ ਦਾ
-Outstanding machinable SLA material
ਸਰੀਰਕ ਵਿਸ਼ੇਸ਼ਤਾ - ਤਰਲ ਪਦਾਰਥ
ਦਿੱਖ | ਵ੍ਹਾਈਟ |
ਘਣਤਾ | 1.13g / ਸੈ 3 25 ℃ @ |
ਲੇਸ | 376 ਸੰਸਦੀ @ 27 ℃ |
DP | 0,148 ਮਿਲੀਮੀਟਰ |
ਚੋਣ ਕਮਿਸ਼ਨ | 7.8 ਐਮ / ਸੈ 2 |
ਬਿਲਡਿੰਗ ਪਰਤ ਮੋਟਾਈ | 0.1mm |
Note: the temperature of szuv-w8006 should not be too high. Please use it below 25℃. Recommended temperature for use and preservation is 18-25 ℃.
ਸੰਭਾਲ ਅਤੇ ਸਟੋਰੇਜ਼
(1) ਓਪਰੇਸ਼ਨ ਇਲਾਜ ਤਕਨੀਕੀ ਉਪਾਅ
ਅੱਖ, ਚਮੜੀ ਅਤੇ ਕੱਪੜੇ ਨਾਲ ਸੰਪਰਕ ਪਰਹੇਜ਼ ਕਰੋ. ਧੁੰਦ ਜ ਭਾਫ਼ ਸਾਹ, ਅਚਾਨਕ, ਨਿਗਲ ਨਾ ਨਾ ਕਰੋ ਰੱਖਣ ਕੰਟੇਨਰ ਜੂੜ ਪੂਰੀ ਸਫਾਈ ਦੇ ਬਾਅਦ ਬੰਦ ਕਰ ਦਿੱਤਾ.
(2) Partial or full ventilation, maintain adequate ventilation
(3) ਸੁਰੱਖਿਅਤ ਸੰਭਾਲ ਮਾਮਲੇ ਦਾ ਧਿਆਨ ਕੋਈ ਸਮੋਕ ਦੀ ਲੋੜ, ਕੋਈ ਅੱਗ
(4) ਸੁਰੱਖਿਅਤ ਸਟੋਰੇਜ਼ ਹਾਲਾਤ
Stored in a cool, well-ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.
(5) ਪੈਕੇਜਿੰਗ ਕੰਨਟੇਨਰ ਅਤੇ ਸਮੱਗਰੀ
ਹਿਰਾਸਤ ਦੀ ਪ੍ਰਕਿਰਿਆ ਵਿੱਚ, ਹੋਰ ਕੰਟੇਨਰ ਤੱਕ ਦਾ ਤਬਾਦਲਾ ਨਾ ਕਰੋ. ਉਤਪਾਦ ਦੀ ਅਸਲੀ ਕੰਟੇਨਰ ਹੈ, ਜੋ ਕਿ ਵਰਤਿਆ ਜਾਵੇਗਾ ਨੂੰ ਵਾਪਸ ਡਿੱਗ ਨਾ ਕਰੋ.
Application Cases
ਸਿੱਖਿਆ
ਰੈਪਿਡ ਪ੍ਰੋਟੋਟਾਈਪ
ਆਟੋ ਦੇ ਅੰਗ
Constructional ਡਿਜ਼ਾਇਨ
ਕਲਾ ਡਿਜ਼ਾਈਨ
ਮੈਡੀਕਲ
Physical Properties (Liquid)
ਦਿੱਖ | ਵ੍ਹਾਈਟ |
ਘਣਤਾ | 1.13g / ਸੈ 3 25 ℃ @ |
ਲੇਸ | 376 ਸੰਸਦੀ @ 27 ℃ |
DP | 0,148 ਮਿਲੀਮੀਟਰ |
ਚੋਣ ਕਮਿਸ਼ਨ | 7.8 ਐਮ / ਸੈ 2 |
ਬਿਲਡਿੰਗ ਪਰਤ ਮੋਟਾਈ | 0.1mm |
Mechanical Properties (Post-Cured)
ਮਾਪ | TEST METHOD |
ਮੁੱਲ |
90 ਮਿੰਟ ਦੀ UV ਪੋਸਟ-ਇਲਾਜ | ||
ਸਖ਼ਤ, ਕੰਢੇ 'ਡੀ | ASTM 'ਡੀ 2240 | 87 |
ਿਵੰਗੀ modulus, mpa | ASTM ਡੀ '790 | 2,592-2,675 |
ਿਵੰਗੀ ਤਾਕਤ, mpa | ASTM ਡੀ '790 | 70 75 |
Tensile modulus, mpa | ASTM ਡੀ '638 | 2,599-2,735 |
Tensile ਤਾਕਤ, mpa | ASTM ਡੀ '638 | 39-56 |
ਬਰੇਕ 'ਤੇ elongation | ASTM ਡੀ '638 | 13 -20% |
Poisson’s Ratio | ASTM ਡੀ '638 | 0.4-0.43 |
ਅਸਰ ਦੀ ਤਾਕਤ ਦਰਜ Izod, ਜੰਮੂ / ਮੀਟਰ | ASTM ਡੀ '256 | 35 - 45 |
ਹੀਟ deflection ਤਾਪਮਾਨ, ℃ | ASTM D ਨੂੰ 648 @ 66PSI | 62 |
Glass transition, Tg,℃ | DMA, ਈ "ਪੀਕ | 73 |
Coefficient of thermal expansion, /℃ | TMA (ਟੀ <TG) | 95 * ਈ-6 |
ਘਣਤਾ, g / cm 3 | 1.16 | |
Dielectric Constant 60 Hz | ASTM D ਨੂੰ 150-98 | 4.6 |
Dielectric Constant 1 kHz | ASTM D ਨੂੰ 150-98 | 3.9 |
Dielectric Constant 1 MHz | ASTM D ਨੂੰ 150-98 | 3.6 |
Dielectric Strength kV/mm | ASTM 'ਡੀ 1549-97a | 14.9 |
Note: the temperature of szuv-w8006 should not be too high. Please use it below 25℃. Recommended temperature for use and preservation is 18-25 ℃.