Resin-SZUV-W8006-exquisite white
Tabhairt isteach Ábhair Priontáil 3D
tréithe
SZUV-W8006
CUR SÍOS AR AN TÁIRGE
SZUV-W8006 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. SZUV-W8006 can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries. The parts durability building with SZUV-W8006 is over 6.5 months.
Tipiciúla GNÉITHE
-Liquid resin is medium viscosity, so easy for recoating, easy to clean parts and machines
neart -Improved choinneáil, toisí níos choinneáil codanna i riocht humid
-Need minimal part finishing
seilfré -Long i meaisín
Tipiciúla SOCHAIR
-Need less part finishing time, easier post-curing
-Building accurate and high tough parts with an improved dimensional stability
rialú cáilíochta -High do páirteanna réitigh i bhfolús
-Low Laghdaigh agus friotażocht maith le buí
dath bán -Magnificent
-Outstanding machinable SLA material
Airíonna Fisiceacha - Ábhar leachtacha
Dealramh | Bán |
Dlús | 1.13g / cm 3 @ 25 ℃ |
slaodacht | 376 CPS @ 27 ℃ |
Dp | 0.148 mm |
ec | 7.8 mJ / cm 2 |
tiús ciseal Tógáil | 0.1mm |
Note: the temperature of szuv-w8006 should not be too high. Please use it below 25℃. Recommended temperature for use and preservation is 18-25 ℃.
Láimhseáil Agus Stóráil
(1) bearta teicniúla a chóireáil Oibríocht
Seachain teagmháil leis na súile, craiceann agus éadaí. Ná inhaling cheo nó gaile, ná swallow thaisme, a choinneáil coimeádán dúnta go docht i ndiaidh an glanadh críochnúil.
(2) Partial or full ventilation, maintain adequate ventilation
(3) nithe a láimhseáil Sábháilte aire a thabhairt dóibh aon deataigh, gan aon tine
(4) dálaí stórála Sábháilte
Stored in a cool, well-ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.
(5) coimeádán agus ábhar an phacáistithe
Sa phróiseas faoi choimeád, ní gá do thoil a aistriú chuig coimeádáin eile. Ná ní thagann siad ar ais go dtí na coimeádáin bunaidh de tháirgí a bheidh in úsáid.
Application Cases
oideachas
fhréamhshamhail Mear
Páirteanna Auto
dearadh foirgníochta
Dearadh Ealaíne
Leighis
Physical Properties (Liquid)
Dealramh | Bán |
Dlús | 1.13g / cm 3 @ 25 ℃ |
slaodacht | 376 CPS @ 27 ℃ |
Dp | 0.148 mm |
ec | 7.8 mJ / cm 2 |
tiús ciseal Tógáil | 0.1mm |
Mechanical Properties (Post-Cured)
Tomhas | TEST METHOD |
VALUE |
90-nóiméad UV iar-leigheas | ||
Cruas, Shore D | ASTM D 2240 | 87 |
modulus flexural, mpa | ASTM D 790 | 2,592-2,675 |
neart flexural, mpa | ASTM D 790 | 70- 75 |
modulus teanntachta, MPa | ASTM D 638 | 2,599-2,735 |
Neart teanntachta, MPa | ASTM D 638 | 39-56 |
Fadú ar sos | ASTM D 638 | 13 -20% |
Poisson’s Ratio | ASTM D 638 | 0.4-0.43 |
Neart Tionchar notched Izod, J / m | ASTM D 256 | 35 - 45 |
teocht sraonadh Teas, ℃ | ASTM D 648 @ 66PSI | 62 |
Glass transition, Tg,℃ | DMA, E "buaic | 73 |
Coefficient of thermal expansion, /℃ | TMA (T <Tg) | 95 * E-6 |
Dlús, g / cm 3 | 1.16 | |
Dielectric Constant 60 Hz | ASTM D 150-98 | 4.6 |
Dielectric Constant 1 kHz | ASTM D 150-98 | 3.9 |
Dielectric Constant 1 MHz | ASTM D 150-98 | 3.6 |
Dielectric Strength kV/mm | ASTM D 1549-97a | 14.9 |
Note: the temperature of szuv-w8006 should not be too high. Please use it below 25℃. Recommended temperature for use and preservation is 18-25 ℃.