Resin-SZUV-S9006-high tenacity
3D ပုံနှိပ်ပစ္စည်းများ၏နိဒါန်း
ဝိသေသလက္ခဏာများ
SZUV-S9006
ကုန်ပစ္စည်းအကြောင်းအရာ
SZUV-S9006 သည့် SL စေးများကဲ့သို့တစ်ဦးကို ABS ဖြစ်ပါတယ် High-ခိုင်မာခြင်း features. It is designed for solid state SLA printers. SZUV-S9006 can be applied in master patterns, concept models, assembly parts and functional prototypes in the field of automotive, medical and consumer electronics industries. The parts durability building with SZUV-S9006 is over 6.5months.
ပုံမှန်အားဖြင့် အင်္ဂါရပ်များ
-Liquid resin's medium viscosity, so easy recoating, easy to clean parts and machines
စိုစွတ်သောအခြေအနေအစိတ်အပိုင်းများ -Improved အစွမ်းသတ္တိကိုထိန်းသိမ်းထား, တိုးတက်လာသောအတိုင်းအတာ retention ကို
အနည်းဆုံးအစိတ်အပိုင်းတစ်ခုပြီး -need
စက်အတွက် -Long ကမ်းလွန်ရေတိမ်ပိုင်းဘဝ
-အနိမျ့ အောက်ခြေကျုံ့
ပုံမှန်အားဖြင့် အကျိုးကျေးဇူးရလဒ်ရယူ
-Need less part finishing time, easier post-curing
-Bulid accurate and high tough parts with an improved dimensional stability
လေဟာနယ်သတ္တုများပုံသွန်းအစိတ်အပိုင်းများအဘို့အ -High အရည်အသွေးကိုထိန်းချုပ်မှု
အဝါရောင်မှကျုံ့ခြင်းနှင့်ကောင်းသောခုခံအနိမျ့
-Magnificent အဖြူအရောင်
-Outstanding machine SLA ပစ္စည်း
Note: the temperature of szuv-s9006 should not be too high. Please use it below 25℃. The relative humidity for use and storage must be under 38RH%.
MY စီမံကိန်း၏တချို့ရဲ့
ပညာရေး
လက်မှို
အော်တိုအစိတ်အပိုင်းများ
ထုပ်ပိုးဒီဇိုင်း
အနုပညာဒီဇိုင်း
ဆေးဘက်ဆိုင်ရာ
Physical Properties (Liquid)
ပုံပန်းသဏ္ဍာန် | အဖြူ |
သိပ်သည်းဆ | 1.11- ~ 1.15g / စင်တီမီတာ 3 25 ℃ @ |
ထဲမှာပါတဲ့ | 26 ℃ @ 230 ~ 290cps |
DP | 0,13 ~ 0,145 မီလီမီတာ |
EC | 9.5 ~ 10.5 MJ / စင်တီမီတာ 2 |
အဆောက်အအုံအလွှာထူ | 0.05 ~ 0.12mm |
Mechanical Properties (Post-Cured)
တိုင်းတာခြင်း | စမ်းသပ်ခြင်း METHOD | တန်ဖိုး |
90 မိနစ်ခရမ်းလွန် Post-ရောဂါပျောက်ကင်း | ||
ခိုင်မာသော, Shore: D | ASTM: D 2240 | 75-85 |
Flexural ကိန်းပကတိတန်ဖိုး, MPA | ASTM: D 790 | 2,592-2,675 |
Flexural ခွန်အား MPA | ASTM: D 790 | 63-70 |
ဆန့ကိန်းပကတိတန်ဖိုး, MPa | ASTM: D 638 | 2,489-2,595 |
ဆန့ခွန်အား MPa | ASTM: D 638 | 36-53 |
ချိုးမှာ elongated | ASTM: D 638 | 15-25% |
Poisson’s Ratio | ASTM: D 638 | 0.4-0.44 |
သက်ရောက်မှုတန်ခိုးအစွမ်းသတ္တိ Izod, ဂျေ / မီတာ notched | ASTM: D 256 | 45-70 |
အပူ deflecton နဲအပူချိန်, ℃ | ASTM: D 648 @ 66PSI | 38-50 |
Glass ကိုအကူးအပြောင်း, TG | DMA,, E "အထွတ်အထိပ် | 40-54 |
အပူစျေးကြီး၏မြှောက်ဖော်ကိန်း | TMA (T က <TG) | 90 ~ 102 * E ကို-6 |
သိပ်သည်းဆ, g / စင်တီမီတာ 3 | 1.12-1.18 | |
Dielectric Constant60 Hz | ASTM: D 150-98 | 4.2-5.0 |
Dielectric Constant 1 kHz | ASTM: D 150-98 | 3.3-4.2 |
Dielectric Constant1 MHz | ASTM: D 150-98 | 3.2-4.0 |
Dielectric StrengthkV/mm | ASTM: D 1549-97a | 12.8-16.1 |