Resin-SZUV-S9006-high tenacity
Kupu Whakataki o 3D Tā Materials
āhuatanga
SZUV-S9006
DESCRIPTION HUA
SZUV-S9006 ko te ABS rite SL kapia e he tiketike-taikaha features. It is designed for solid state SLA printers. SZUV-S9006 can be applied in master patterns, concept models, assembly parts and functional prototypes in the field of automotive, medical and consumer electronics industries. The parts durability building with SZUV-S9006 is over 6.5months.
angamaheni Tuhinga
-Liquid resin's medium viscosity, so easy recoating, easy to clean parts and machines
kaha -Improved mau, pai ake ngā āhuatanga pupuri o nga wahi i roto i te huru takawai
mutunga wahi iti -need
ora papa -Long i roto i te mīhini
-Iti hukihuki raro
angamaheni Tuhinga
-Need less part finishing time, easier post-curing
-Bulid accurate and high tough parts with an improved dimensional stability
mana kounga -High mō wāhanga mārua makanga
-Low holomui me ātete pai ki te kōwhaitanga
tae ma -Magnificent
-Outstanding machinable rauemi sla
Note: the temperature of szuv-s9006 should not be too high. Please use it below 25℃. The relative humidity for use and storage must be under 38RH%.
Tuhinga o MY KAUPAPA
Mātauranga
ringa poru
Wāhanga aunoa
Hoahoa Packaging
Art Hoahoa
Medical
Physical Properties (Liquid)
Āhua | White |
kiato | 1.11- ~ 1.15g cm / 3 @ 25 ℃ |
pokey | 230 ~ 290cps @ 26 ℃ |
DP | 0,13 ~ 0,145 mm |
EC | 9.5 ~ 10.5 MJ / cm 2 |
Building matotoru apa | 0.05 ~ 0.12mm |
Mechanical Properties (Post-Cured)
inenga | Tuhinga TEST | Tuhinga |
90-meneti UV pou-rongoa | ||
Pakeke, Shore D | ASTM D 2240 | 75-85 |
uara tawhiti Flexural, MPA | ASTM D 790 | 2,592-2,675 |
kaha Flexural, MPA | ASTM D 790 | 63-70 |
uara tawhiti kurut, MPa | ASTM D 638 | 2,489-2,595 |
kaha kurut, MPa | ASTM D 638 | 36-53 |
Elongation i whati | ASTM D 638 | 15-25% |
Poisson’s Ratio | ASTM D 638 | 0.4-0.44 |
kāniwha Impact kaha Izod, J / m | ASTM D 256 | 45-70 |
Heat deflection pāmahana, ℃ | ASTM D 648 @ 66PSI | 38-50 |
Glass whakawhiti, TG | DMA, E "tihi | 40-54 |
Tau whakarea o ngāwhā expension | TMA (T <TG) | 90 ~ 102 * E-6 |
Kiato, g / cm 3 | 1.12-1.18 | |
Dielectric Constant60 Hz | ASTM D 150-98 | 4.2-5.0 |
Dielectric Constant 1 kHz | ASTM D 150-98 | 3.3-4.2 |
Dielectric Constant1 MHz | ASTM D 150-98 | 3.2-4.0 |
Dielectric StrengthkV/mm | 1549-97a ASTM D | 12.8-16.1 |