Resin-SZUV-S9006-high tenacity
3 डी मुद्रण सामग्री का परिचय
लक्षण
SZUV-S9006
उत्पाद वर्णन
SZUV-S9006 SL राल जो है की तरह एक ABS है उच्च बेरहमी features. It is designed for solid state SLA printers. SZUV-S9006 can be applied in master patterns, concept models, assembly parts and functional prototypes in the field of automotive, medical and consumer electronics industries. The parts durability building with SZUV-S9006 is over 6.5months.
ठेठ विशेषताएं
-Liquid resin's medium viscosity, so easy recoating, easy to clean parts and machines
-Improved ताकत को बरकरार रखा, नम हालत में भागों के बेहतर आयाम प्रतिधारण
-need न्यूनतम हिस्सा परिष्करण
मशीन में लंबी शेल्फ जीवन
-कम नीचे संकुचन
ठेठ लाभ
-Need less part finishing time, easier post-curing
-Bulid accurate and high tough parts with an improved dimensional stability
वैक्यूम कास्टिंग भागों के लिए ऊंची गुणवत्ता नियंत्रण
हटना और पीली करने के लिए अच्छा प्रतिरोध -कम
-Magnificent सफेद रंग
-Outstanding machinable SLA सामग्री
Note: the temperature of szuv-s9006 should not be too high. Please use it below 25℃. The relative humidity for use and storage must be under 38RH%.
मेरी कुछ परियोजनाएं
शिक्षा
हाथ फफूँद
वाहन के कलपुर्जे
पैकेजिंग डिजाइन
कला डिजाइन
मेडिकल
Physical Properties (Liquid)
दिखावट | सफेद |
घनत्व | 1.11- ~ 1.15g / सेमी 3 25 ℃ @ |
चिपचिपापन | 26 ℃ 230 ~ 290cps @ |
डी पी | 0.13 ~ 0.145 मिमी |
चुनाव आयोग | 9.5 ~ 10.5 MJ / सेमी 2 |
भवन परत मोटाई | 0.05 ~ 0.12mm |
Mechanical Properties (Post-Cured)
माप | जाँचने का तरीका | मूल्य |
90 मिनट की यूवी के बाद इलाज | ||
कठोरता, शोर डी | एएसटीएम डी 2240 | 75-85 |
आनमनी मापांक लिए MPA | एएसटीएम डी 790 | 2,592-2,675 |
आनमनी ताकत के लिए MPA | एएसटीएम डी 790 | 63-70 |
तनन मापांक, एमपीए | एएसटीएम डी 638 | 2,489-2,595 |
तन्य शक्ति, एमपीए | एएसटीएम डी 638 | 36-53 |
तोड़ने पर बढ़ावा | एएसटीएम डी 638 | 15-25% |
Poisson’s Ratio | एएसटीएम डी 638 | 0.4-0.44 |
प्रभाव शक्ति नोकदार Izod, जम्मू / मीटर | एएसटीएम डी 256 | 45-70 |
हीट विक्षेपन तापमान, ℃ | एएसटीएम डी 648 @ 66PSI | 38-50 |
ग्लास संक्रमण, टीजी | डीएमए, ई "पीक | 40-54 |
थर्मल expension के गुणांक | TMA (टी <टीजी) | 90 ~ 102 * E-6 |
घनत्व, ग्राम / सेमी 3 | 1.12-1.18 | |
Dielectric Constant60 Hz | एएसटीएम डी 150-98 | 4.2-5.0 |
Dielectric Constant 1 kHz | एएसटीएम डी 150-98 | 3.3-4.2 |
Dielectric Constant1 MHz | एएसटीएम डी 150-98 | 3.2-4.0 |
Dielectric StrengthkV/mm | एएसटीएम डी 1549-97a | 12.8-16.1 |